0 Comment

Enter the IP address you do not want the source IP address to have access to. The final goal, you pressed Finish in the previous window, and now you can see that the router is connected. The value should remain at its default setting of If the log level is set to Error, only Error and the level above will be logged. We think that forwarding a port should be easy.

Uploader: Voodooshura
Date Added: 5 January 2007
File Size: 68.61 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 35450
Price: Free* [*Free Regsitration Required]

When connected wirelessly with the gateway, verify that the wireless client is correctly installed, and if so, whether or not it is correctly set no WEP by default, infrastructure mode.

Using the source or destination or source or destination port or protocol or any combination of any IP address to block a specific user from accessing the Internet also known as Address Filteringthe Firewall dialog box allows you to configure outgoing packet types to be sent using either Roobtics or UDP or a combination roboyics both from specific ports. The firewall blocks internal users from accessing the Internet. Sets the system auto-sense between G. In the picture above the address bar has In addition, verify to ensure the client is synchronized with the gateway.

Refer to the Ping Procedure below. If you experience a high packet error rate, try to slightly increase your Fragmentation Threshold. Type admin in the User Name ue.

USR Default Password & Login, Manuals and Reset Instructions | RouterReset

Enter your postcode Go. WPA Radius uses an external Radius server to perform user authentication. When you’re finished, click Apply near the bottom of the screen to save your changes. We would recommend having at least one computer capable of connecting via Ethernet in an emergency though, for example, robotivs you set the wireless security up wrong and lock yourself out of the network.

You May Also Need:  DRIVERS: SHARP M450U

After clicking Finishthe gateway will save the configuration to the memory and reboot.

USRobotics Support: Model –

The default username and password for the router are admin and admin. It also covers the Easy Configurator application on the CD.

Once the Encryption Strength has been chosen, select the Apply button, then select the Set Encryption Keys button to prompt the Encryption Keys screen. These show that an active Ethernet connection is plugged in, and flash to show activity.

Now that you have forwarded ports on the US Robotics SureConnect you should test to see if your ports are forwarded correctly. It should look something like this:.

The Quality of Service QoS tab is useful only when all of the following conditions are met: Click next to continue to the next stage. When either of the Rerun Diagnostic Tests buttons are clicked, all the diagnostic tests are repeated. Select the protocol as assigned by your ISP and proceed to the matching sections in this manual for further instructions. Restoring Factory Default Settings It is only necessary to restore the gateway to the factory default settings when the gateway is in a non-functioning state or you wish to reprogram completely.

You May Also Need:  DRIVER FOR C655D-S5300

While virtual server can only forward redirect a limited number of services portsDMZ hosting allows all the services ports running on the DMZ host, to be accessible externally. By default, radio NICs passively scan all RF channels and listen for beacons coming from access points to find a suitable access point. This drop-down menu sets either a 64 8-bit 5-character or character hexidecimal or 8-bit character or character key.

U.S. Robotics SureConnect ADSL Wireless Gateway Model 9106 Review

Find out the basics Fix my Broadband Quality of Service is not enabled by default. Enter the IP address you want to have access to the destination IP. There are two levels of WEP encryption, bit and bit.

The corresponding Ethernet LED son the front of the gateway, should be illuminated. A description of each test can be obtained by clicking the Help button associated with the test. The Default Gateway Configuration dialog box allows you to configure a static default gateway IP address. If this screen does not have values yet, this means you need to setup your gateway by going to Begin Quick Setup.